Global Warming News

Today, the necessitate for alternative energy sources is clear. Our reliance on fossil fuels is no longer sustainable or affordable. There is a limited supply of fossil fuels, plus as the global population continues to raise at an accelerating rate, those supplies cannot meet the demands of a rising population. Also, fossil fuels are now known to be a key contributor to climate change as well as carbon emissions. Therefore the necessitate for renewable fuel sources such as biomass is driven on fuel reserve, charge and environmental concerns. The issue is how do we capture the fuel from biomass. Wood in its organic form is not an ideal energy source. Wood generally has a low bulk density plus therefore also a low energy density. Also the moisture content of raw wood is generally too high to provide efficient incineration. Therefore the biomass requires processing into a more useable form of fuel. Pellets are component of that wood solution.

Learn more about Making Pellets

As discussed, wood in its raw form is not ideal as an energy source due to its low density in addition to high moisture content. One of the simplest ways to turn biomass into a highly efficient plus cheap form of fuel is to compress the wood matter into pellets. Pellets are in the shape of small cylinders, which for energy pellets are usually 6 or 8mm in diameter. Pellets have a much higher bulk plus fuel density compared to the raw matter along with also a much lower moisture content below 10%. This enables the pellets to burn much more efficiently than raw wood. There are also developments to produce wood pellets even more proficient, and have a higher fuel density. One interesting practice is torrefaction. Torrefaction is where the biomass is heated to between 200 as well as 300 degrees, in addition to a lot of the unwanted volatiles which decrease combustion efficiency are burnt off. What is left is a much purer form of carbon which not only burns much more more efficiently than standard wood in addition to wood pellets, it also have more than a few extra payback. This payback include being hydrophobic, which means the pellets are not susceptible to moisture as energy pellets currently are. Torrefied biomass as well as wood pellets are gaining ground, along with are the future.

Read more about Biomass Pellets

Converting wood fuel into pellets brings dwelling heating by way of solid wood energy away from high maintenance log stoves into the 21st century. Modern pellet stoves in addition to boilers have a range of automated features which diminish the work load of the owner. For case energy hoppers on pellet burners usually hold at least a days worth of fuel. However some have large external hoppers which hold a years supply. Because of the demand for fuel from wood in addition to a greater demand for pellets, interest in pellet manufacture has also grown significantly. Producing quality fuel pellets requires quite a few pieces of gear from chippers, hammer mills, dryers plus pellets mills also known as pellet machines plus pellet press. Operating this equipment requires a precise knowledge of what each material requires to create quality pellets.

More information on Pellet Maker